dr-135T

ALINCO DR135T/EMkIII

 

Revised NEW circuit to be compliant to RoHS/Lead-free order in EU.
Voice-only FXE-version available (European model only, EJ-41U/47U not usable).
EJ-41U internal TNC board is available as an option for 1200/9600bps packet
50 watts, H/M/L power settings
100 memory channels.
Front panel data port
Rear panel DSUB9 computer connection
No need to remove mic for packet operation
Ignition key on/off feature
CTCSS, DCS encode+decode, DTMF encode and Tone-burst are all standards
Clean, clear Alinco audio

 

Product Description

  • Revised NEW circuit to be compliant to RoHS/Lead-free order in EU.
  • Voice-only FXE-version available (European model only, EJ-41U/47U not usable).
  • EJ-41U internal TNC board is available as an option for 1200/9600bps packet
  • 50 watts, H/M/L power settings
  • 100 memory channels.
  • Front panel data port
  • Rear panel DSUB9 computer connection
  • No need to remove mic for packet operation
  • Ignition key on/off feature
  • CTCSS, DCS encode+decode, DTMF encode and Tone-burst are all standards
  • Clean, clear Alinco audio
  • Super-wide 7 character alphanumeric display
  • Wide and narrow FM modes (16K0 & 8K50F3E)
  • Theft alarm feature
  • A large, palm-fitting commercial-grade backlit microphone with a metal connector (not a modular plug) as well as direct frequency input and direct multi-function access such as monitor, call channel, power setting, memory to VFO plus more!
  • Stays in mode you select (voice/packet) through power off cycles
  • Ten autodial memories
  • and more….at Low Alinco price!
General
Frequency range: TX(T):
144-147.995MHz (FM)
RX(T):
118-135.995 MHz (AM)
136-173.995MHz (FM)
TX&RX(E): 144-145.995MHz
Operating mode: 16K0F3E (FM)/8K50F3E (Narrow-FM)
F1(9600bps)/F2(1200bps)/10F3 * 1
/A3E (RX only DR135TMkII)
Channel steps: 5, 8.33, 10, 12.5, 15, 20, 25, 30, 50 KHz
Memory channel: 100 channels + 1 quick recall (CALL)
Antenna impedance: 50ohm unbalanced
Frequency stability: +/- 2.5ppm TCXO
Power supply requirement: 13.8V DC +/- 15% negative ground
Current drain: Approx. 11.0A TX High
Approx. 0.4A squelched
Usable temperature range: -10digC to +60digC (+14digF to 140digF)
Dimensions (w/o projection): 142(W) x 40(H) x 174(D) mm
5.59″(W) x 1.57″(H) x 6.85″(D)
Weight: Approx. 1.0Kg (35.3oz)
Transmitter
Power Output: Approx. 50W(HI)
Approx. 20W(MID)
Approx. 5W(LOW)
Modulation system: Variable reactance frequency modulation
Spurious emission: Less than -60dB
Maximum frequency deviation: +/- 5 KHz (FM) / +/- 2.5 KHz (NFM)
Receiver
Receive system: Double-conversion superheterodyne
Sensitivity (-12dB SINAD): *2 Less than -16.0dBu
Intermediate frequency: 1st IF 21.7MHz, 2nd IF 450 KHz
Selectivity: *2 -6dB: 12KHz or more
-60dB: 28KHz or less (FM)
-6dB: 6KHz or more
-60dB: 16KHz or less (NFM)
Audio output power: More than 2.0W(8ohm 10%THD)
Note: * 1 Optional units required
* 2 Typical within the amateur radio band(s).
Optional Accessories
Microphones EMS-53 Plain microphone
EMS-57 DTMF/Remote microphone
Separation Cable
Digital voice unit EJ-47U
TNC unit EJ-41U
DC Power supply DM330MVT (120VAC) 30A switching
DM330MVE (240VAC) 25A switching

Reviews

There are no reviews yet.

Be the first to review “ALINCO DR135T/EMkIII”